电压12/24V
Max Flow40L/min
Max Vacuum-85 kPa
Max Pressure1Bar
电机High-end 无刷电机
Max Power50W
重量1.4kg
参数Value
ModelOD-05T1040LB
Voltage Range12 V / 24 V DC
Maximum Flow Rate40 L/min
Maximum Vacuum-85 kPa
Maximum Pressure1 bar
Motor TypeHigh-end 无刷 DC Motor
Maximum Power50 W
IP RatingIP20
Service Life> 8,000 hours (continuous duty)
Storage Temperature-40 ℃ ~ +60 ℃
Operating Temperature-10 ℃ ~ +45 ℃
Dimensions (L×W×H)116 × 81 × 121 mm
重量1.4 kg
ComponentMaterial / Performance
Pump HeadPPS or Aluminum alloy - high strength, heat-resistant engineering thermoplastic
Diaphragm/ValveEPDM standard (FKM/PTFE optional)
Pump BodyAluminum alloy - corrosion-resistant, excellent thermal conductivity
BearingsImported ball bearings for extended durability
寿命>8,000 hours continuous duty in clean, non-corrosive environments
Customization AspectAvailable Options / Notes
Pump HeadStandard PPS pump head with 1/8″ internal threaded port ; optional aluminum alloy pump head with 1/4″ internal threaded port
Diaphragm MaterialsEPDM, FKM, PTFE
Electrical ConnectorCustom cable length and connector type for OEM integration
Label / BrandingCustom product labeling for OEM projects
Integration SupportEngineering guidance for high-flow industrial and laboratory systems
Pin No.Wire Color | Signal | Wiring Description
Pin 1Yellow | FG | Speed feedback signal output. Outputs pulse signal proportional to motor speed (1 pulse per revolution). Connect to controller or oscilloscope for speed monitoring.
Pin 2Green | SP | Speed control wire. Supports PWM and 0-5V analog speed control. PWM: 5V amplitude, 10-30 kHz; duty 0-10% motor stop, 11-90% speed adjustment, 90-100% full speed. Analog: 0.5-4.5V speed adjustable, 0.5V stop, 4.6-5.0V full speed.
Pin 3Black | GND | Power negative. Connect to power supply negative. (Reverse polarity protection is supported.)
Pin 4Red | VCC | Power positive. (Reverse polarity protection is supported.) At full-speed operation, red and green wires are connected to power positive, black wire to power negative.