Find a miniature pump by medium, function and working point.

Use this page to turn an early requirement into a pump-selection direction. Selection is not based on maximum flow alone; it connects medium, target flow, pressure or vacuum, power, control, mounting and validation conditions.

Current directionAir or compatible gasVacuum generation

Add target flow, pressure or vacuum and interface conditions before requesting review.

Enter the operating requirement

Approximate values are useful. Leave unknown fields blank and continue the detail in the RFQ.

Suggested product series to review first

These are starting points only. The final model depends on the complete fluid path, duty cycle, electrical interface and validation conditions.

Pump selection decision path

Breaking “what pump do we need?” into verifiable system conditions reduces reselection and late rework.

  1. 01

    Define medium and function

    Start with gas, air, water-based liquid or another compatible medium, then choose pressure, vacuum, transfer, circulation or sampling.

  2. 02

    Add the working point

    Target flow, pressure or vacuum must be considered with tubing, filters, valves, fittings and leakage.

  3. 03

    Match power and interfaces

    Voltage, duty cycle, motor type, control signal, port size, mounting and noise limits determine the usable configuration.

  4. 04

    Confirm with evidence

    Final selection should be checked against a defined model, configuration, test condition and validation plan.