Component preparation
Incoming parts checked and prepared by work order.
From an Approved Pump Configuration to Repeatable Production
Production planning connects the approved model, drawing, bill of materials, process requirements, inspection points and release criteria.
Production process and required records
- 1
Approved configuration
Required document / deliverable
Approved configuration pack - 2
Component preparation
Required document / deliverable
Component checklist & traceability - 3
Assembly
Required document / deliverable
Assembly record - 4
Inspection & test
Required document / deliverable
Test record - 5
Identification & packing
Required document / deliverable
Packing list & label record
What the production route controls
| Control area | Focus |
|---|---|
| Product identity & revision | Approved model, revision level, effectivity |
| Materials and critical parts | Approved materials, supplier, lot/heat traceability |
| Assembly and wiring | Assembly sequence, torque, wiring method, routing |
| Inspection points | Defined checkpoints and acceptance method |
| Test method and acceptance | Test condition, method, and acceptance criterion |
| Labels and packing | Identification, labeling, protection, packing method |
Inside the manufacturing flow
Pump assembly
Mechanical assembly per approved procedure.
Electrical connection
Wiring and connector installation per drawing.
In-process inspection
Key dimensions and torque checked at defined points.
Performance testing
Each unit tested under a defined condition.
Final identification
Model, revision and serial number recorded.
Performance verification
has a defined condition
TEST RECORD
Model / configuration
Revision
Serial number
Test result
Tested by
Date
| Condition item | Specification |
|---|---|
| Model / configuration | As per approved configuration |
| Supply voltage | Per approved specification |
| Medium | Per approved specification |
| Ambient condition | Per approved specification |
| Test fixture | Per approved drawing |
| Acceptance criterion | Per approved specification |
| Data revision | Per approved revision |
Quality gates before production release
- 1
Incoming / component control
Parts verified to approved requirements.
- 2
First assembly review
First-off assembly checked against procedure.
- 3
In-process check
Defined checkpoints completed.
- 4
Performance verification
Test completed under defined condition.
- 5
Final inspection
Overall inspection and identification verified.
- 6
Change review
Any change reviewed before release.
Configuration and change control
| Current approved revision | Proposed change | Affected interfaces | Validation required | Release decision |
|---|---|---|---|---|
| — | — | — | — | — |
Documents by model and project scope
Drawing
Confirm applicable model and current revision
Wiring information
Confirm applicable model and current revision
Test record
Confirm applicable model and current revision
Material information
Confirm applicable model and current revision
Compliance document
Confirm applicable model and current revision
Factory visit and technical review
We welcome OEM teams and quality engineers to review the manufacturing process, test methods and documentation for your specific configuration.
Request a Visit / Technical ReviewPreparing a sample, pilot build or production order?
Share your approved configuration and requirements so we can align the production plan and quality controls.